Showing posts with label Painting. Show all posts
Showing posts with label Painting. Show all posts

13 December 2022

Eureka Miniatures 18mm Sci-Fi Mayans

A fun mini project to complete were these Eureka Miniatures' 18mm Sci Fi Mayans in the style of Jack Kirby (Marvel comics). They were a gift from Nic, and I planned to use these for post apocalyptic car war games, but they're a little small compared to 1/72 / 20mm toy cars. So I'm currently writing so skirmish rules for them.

They were fun to paint, a little flash that was easily cleaned up. I also added magnets to the 20mm washer bases, to see if this is a viable storage solution (Mike has convinced me to start a 20mm Soviet Battlegroup army...). Apart from Kirby, their style also reminds me of Pierre Christin's Valerian comics (particularly Empire of a Thousand Planets).

In addition in the same painting session I also painted these 28mm Victorian lamp posts (all from Eureka) for my ongoing botanic gardens terrain project.

02 November 2022

Battletech Mechs and 28mm Stargate Team

Just finished off some Battletech mechs from the most recent version box set (link), painting them as Lyran Guards. I used Vallejo dark blue (70.930) and off white (70.820) that allowed me to edge highlight with white (new found love for this technique). Canopies were painted in a bronze/gold to compliment the blue. I also used an oil wash and home made pigment powders (using non-oil pastels), finishing off with some suitable decals.

I also used the powders on these 28mm US Marine Recon miniatures from Eureka Miniatures, that I painted as a generic Stargate team. The greens are a mix of Vallejo German Camouflage Dark Green (70.979) and German Fieldgrey WWII (70.830).

They will soon be joined by some Jaffa and suitable terrain.

23 May 2021

Basing War at Sea Ships

So I have over 100 (probably closer to 200) of Wizards of the Coast's 1/1800 Axis & Allies Naval Miniatures: War At Sea ships that I've wanted to base for years but I've been daunted by the size of the task.

I had purchased the 3mm thick basing material (45mm wide MDF for battleships and aircraft carriers and 25mm wide masonite hardboard packer for cruisers and destroyers) during 2020. Now is was just a matter of actually settling on a method that was cheap, easy to replicate and looked good. Not easy.

The first step was cutting the bases into the right lengths, adding an extra 10mm on the front and 20mm to the back, which would accommodate a 10mm long label with ship name, class and nationality, etc. As i was planning to host the Battle of the Denmark Strait in a few weeks I tested the basing solution on the HMS Hood, HMS Prince of Wales, Bismarck and Prinz Eugen miniatures in my collection.

After gluing the ships down with PVA (so if I change my mind in the future they're easily removable) I proceeded to cover the base in pre-mixed plaster (Uni-Pro's multi-purpose interior filler) and move it around while still quite wet with a smooth flat needle file to create waves, bow and propeller wakes.

Once this was completely dry (i.e. leaving it overnight), I painted the whole base (leaving about a 1mm unpainted next to the ship) in Kaisercraft's navy blue craft paint. I did two coats to ensure an even coverage.

This was followed by a heavy dry brush of 3 parts navy blue to 1 part cool grey (a mid grey tone) and then followed by a slightly lighter dry brush of 1 part navy blue to 1 part cool grey.

I was following Yarkshire Gamer's YouTube guide on basing, and so I painted the tips of the wakes in a 1 part white to 1 part cool grey mix to take the brightness down a little. Problem was it looked too fake.

So I dappled a 1 part navy blue to 1 part white to try to blend them in with the rest of the base. That looked even worse in my opinion.

After searching for images of battleships during WWII online, and noting that ships aren't usually moving at their full speed (even during a battle), I went back a few steps (leaving the light grey on the propeller wakes). Much better.

The final step involved sealing the bases with a gloss varnish (also from Kaisercraft) and designing labels for every ship. The ones on the rear of the base were mounted on card and had their edge painted in grey. They're kept in place with Blutac so I can swap out for other ships in the same class. The label underneath is the ship that War at Sea states the ship is and was glued in place with PVA.

I am happy with the outcome - cheap, will be easy to replicate and looks good. In the first instance I will do the other historical battle sets I have all the ships for, namely the Battle of the River Plate and the Battle of the Java Sea. I still imagine it will take years to complete the whole collection.

22 March 2021

Luftwaffe 1946 Baby Mobile

With a little one on the way I decided to do something a little different. With some 1/72 late WWII / Luftwaffe 1946 model kits unfinished from a fair few years ago (pre-wargaming life) I decide repurposing them into a baby mobile made perfect sense.

Using what I had I only bought Dragon's Messerschmitt Me 163 Komet for its size (to balance the weight of the Messerschmitt P.1101). Below follows the aircraft, a source photograph and its Wikipedia page.

Republic-Ford JB-2 Loon


https://en.wikipedia.org/wiki/Republic-Ford_JB-2

Bachem Ba 349 Natter

It's also worth reading an account of the first (and last) manned flight of the Natter by Lothar Sieber:

https://www.airspacemag.com/airspacemag/world-war-iis-worst-airplane-180973153/

https://en.wikipedia.org/wiki/Bachem_Ba_349

Fieseler Fi 103R Reichenberg

https://en.wikipedia.org/wiki/Fieseler_Fi_103R_Reichenberg

Captured British Messerschmitt Me 163 Komet

 

https://en.wikipedia.org/wiki/Messerschmitt_Me_163_Komet

Messerschmitt P.1101

https://en.wikipedia.org/wiki/Messerschmitt_P.1101

And putting them all together:

A few month in, the little one is loving them. The finish on them is a little rough, but I was working with some that were half painted, and or horrible to put together in the flight mode (I'm looking at you P.1101). But I'm very happy with the overall result.

American Civil War Union Skirmishers and Walking Dead Zombies

A quick painting session as I had recently placed a large order with Perry Miniatures, including a box of their plastic Confederate infantry and I hadn't finished their first box set I had bought years ago. In addition to them I also had some of Sash & Sabre's Federal Infantry Skirmish or Firing Line (also bought around 2010) that I started painting a few years ago and then put on the back burner.

The photos below show my typical undercoat technique of raw umber craft paint (over a black spray painted undercoat followed by a ~5/1 highlight dry brush of raw umber/white. Then paint as normal (also with highlights, etc).

A simple job, but I wanted these done. There will be a whole lot of Confederates that they will face (an army for Rebels and Patriots) and some of them can be seen in the background of that photo above.

While I finished painting these, I also completed the Walking Dead zombies I had got from Jack at Christmas.

These will be used for a Flag of Our Zombies game I plan to have in the near future.

28 February 2021

15mm WWII German 12cm Mortars, PaK 43/41 AT Guns and Command Stand

A small 15mm WWII German painting commission of four 8.8cm PaK 43/41 AT guns (GE530), four 12cm mortars (GE799) and a command stand. All Battlefront miniatures and painted over 10 days.

While the PaKs and command stand were metal and what most of my Flames of War collection is produced in, the mortar stands are in Battlefront’s bendy ABS plastic (introduced after I stopped playing the game seriously), and it's the first time I’ve worked with it. In short it's terrible, mainly as it was hard to clean up and some of the detail was rough.

All and all I’m happy how this turned out - it’s been a while since I painted 15mm WWII and I tried splinter camo on the mortar teams (one smock and every helmet cover on each base), which I think came out pretty well (using Battlefront's painting guide in the back on one of the Late War army books). This was because that particular mortar pack is for SS, but I wanted them to be Heer. An easy soltution as nearly everyone in the German army in World War Two used splinter camo:

https://en.wikipedia.org/wiki/Splittertarnmuster


The unicorn, dolphin and rainbow flag is (obviously) not historical and was requested by the client (Andrew O). Apparently Flames of War version 4 doesn’t have command teams (as version 3 did), but you still need a marker or similar to indicate which gun team, etc is the platoon commander. Makes no sense to me either.

25 January 2021

Battletech Repainted Demi-Company of Mechs

Back around 2006-2009 I played a little bit of Battletech. At that time (around May 2006) I got my first Battletech miniatures: an Assassin, Panther, Unseen Longbow and a few Locusts.

I painted them to an average standard as at the time Phil was running a tournament with an extremely fun auction element (run via group email). There was fierce bidding, as some players were keen to get their favourite mechs, and pay a premium for that. There was little time between the auction and the tournament (run over several weeks) games (hence the quick paint jobs). I don't remember these games, but I imagine I fared averagely with the Assassin, Panther, Locust and Spider (borrowed). I don't care, as it did get me hooked on the game and background. (Technically my first Battletech miniature was a stumpy little Atlas a family friend gave me in the early 90s, and I have just worked out it's from FASA's PlasTech range: https://www.sarna.net/wiki/PlasTech.)

After this tournament, in late 2008, I purchased Catalyst Games' Classic Battletech introductory box set (https://www.sarna.net/wiki/Classic_BattleTech_Introductory_Box_Set). The box set gave me some miniatures and maps. Even at the standard of the day, the miniatures were quiet average. I've painted a few, but I'm really not happy with them. Follow up acquisitions include a Marauder (2008), Blackjack and Vulcan (both 2009).

Which brings us up to the present.

I didn't get onboard with the recent Kickstarter, but it has renewed interest in the game in several of my wargaming circles. So I thought it was time to paint what I had, and bight the bullet and repaint the ones I wasn't happy with. This batch would include the unpainted Marauder, Blackjack and Vulcan, along with the painted Panther, Assassin and Longbow.

Blackjack:

Vulcan:

Unseen Longbow:

My original paint schemes were loosely based on Bundeswehr Cold War-era winter camo, plain grey and German late WWII assault camo schemes. And all with winter bases (yeah, I haven't played on any appropriate maps either). The Blackjack, Vulcan and Marauder were already undercoated black, the other three were painted in the winter camo.

They don't look coherent and so my plan to try and fix this I'll start on a grey base (some mechs left in their original "looted" colour) and either over paint everything in green and sand (similar to American WWII North Africa camo) or other camo schemes on the grey using these colours (e.g. assault or American Desert Battle Dress Uniform). My mechs would also be part of a mercenary unit, and so to tie all of the mechs together I will give the mechs red left shoulders and red right hands. Haven't thought of a name yet, but probably something with "Panzer" in the title.

First attempt at this camo:

I'm happy with the Vulcan's camo, but the Blackjack needs something more to make it looks less like he's wearing pyjamas or something. Probably by adding grey, bronze and gunmetal panels to break up the mechs that need it. I added larger khaki splotches on the Blackjack to help with this too.

Progress:

Finished demi-company of mechs; having varnished, added decals and static grass (that is versatile in its neutrality).

BJ-1 Blackjack (Iron Wind Metals): 

VL-2T Vulcan (Iron Wind Metals):

Unseen MAD-3R Marauder (Ral Partha):

Unseen LGB-0W Longbow (Ral Partha):


ASN-21 Assassin (Iron Wind Metals):

PNT-9R Panther (Iron Wind Metals):

About another 25 mechs to paint, but I'm in no rush to get them done as most of those are the plastic ones.