Knights of Dice's 1889 Mignola Avenue Part 2

Work continues on 1889 Mignola Avenue. I dry brushed the "concrete" parts tones of grey:

I probably should have painted the access covers, etc at this point, but I was too impatient and wanted to glue this beauty together. I'm gushing, aren't I?

Painted the door blue as a point of difference on the model:

I also glued a sheet of clear plastic followed by a sheet of slightly textured black card for the backing of the windows and door:

I will just need to be careful I don't dirty them as I finish the rest of the build.

Next step involved gluing the inside strips of brick, ensuring they were glued the right way up:

I also used clothes pegs to ensure I got a clean fit:

The roof got a light black wash to bring back some definition:

And I glued on the side panels, ensuring just a thin layer of PVA:

Slowly getting there, but probably can finish it off in two sessions; one for the washes, one for the tufts of foliage, etc.

(Mad) Maximillian 1934 Part 1

Yesterday I dropped into Eureka Miniatures and picked up (among other things) the Mad Maximillian Flyer car, running versions of the crew miniatures and the turning template for the Maximillian 1934 rules by Mana Press.

Even though (like most of us) I have other projects that need to be finished (planned games, tournaments, etc) I was keen to get started what I got:

The above photo shows all the parts you get with the Mad Maximillian Flyer (100MMX003), swapping out the driver for the female one, the female driver foot figure (100MMX009), the bareheaded male running with flimsies (100MMX010) along with the turning template for Maximillian 1934.

I also added the Double Armed Heroine, based Louise Brooks photo with the two pistols:

Not sure if she's available yet from Eureka, but she's a beautiful little figure. You can read about Ms Brooks here:
https://en.wikipedia.org/wiki/Louise_Brooks

Late last night I managed to glue the car together and started painting the template. A little fiddly, but a lot of fun!

The only mod I need to do to the resin hull was file some groves on the left and right hand side directly behind the grille to allow the front axle plate fit:

The rear gunner arrangement was the most fiddly. I decided to glue everything together, as I could tell I'd need to fill gaps with Greenstuff. Particularly at the join between the support and the hull. I was impressed how well everything fitted together, it only took 30 minutes or so.

I then glued car (that'll be dubbed the Bull of Dudley Flats) onto a credit (well gift) card base and will now need to plaster the base along with those for the figures on foot:

The man holding the Lewis gun will need to have his have sculpted, and I'll probably add a few things on each of them to make them unique.

For those wanting to get their template done, instead of following Mana Press' video:
https://www.facebook.com/tribalgame/videos/1891941354153823/

A quick alternative would be just to use a black felt tip pen. I decided to go ahead with another alternative and paint mine raw umber with a highlight instead, as I wanted to do something with chalk (as the Mignola Avenue building had turned out so well).

These parts still need a spray of matt varnish, which will dull down that dustiness they now have.

I also haven't full decided on the car's colour scheme, I'm currently thinking of dark grey or black and call it the Black Bull.

Last Game I Played - L'Art de la Guerre

200 points practice game before the November tournament.

Knights of Dice's 1889 Mignola Avenue Part 1

Last week my FLGS, Mind Games, got a huge resupply of Knights of Dice MDF terrain kits:
https://www.knightsofdice.com/store/

I had painted a few Western pieces (from some other manufacturer) a few years ago and wasn't overly impressed at the time as they didn't paint well and looked too much like theatre sets (boxy and plain). Partly my fault I think, so I decided to give this MDF terrain thing a second chance.

So far I'm glad I did.

I bought the 1889 Mignola Ave set as I'm been thinking of creating some generic urban terrain that can be used for 1930s gangster, superheroes and zombie apocalypse games:
http://knightsofdice.com/store/index.php?main_page=product_info&cPath=51_52&products_id=42

Now that, minus the graffiti, is the look I want to achieve. I didn't buy the cable-runs upgrade pack (as seen on the roof space), as I just wanted to see what the Knights of Dice kits are like. This is what it looked like when I did a dry fit:

Pretty good detail, went well together as the PDF instructions are clear. At this stage I was already happy. But how to get that final look?

The Terrain Tutor and Viv (from Knights of Dice) own videos were instructive and easy to follow. I'm basically following a mixture of these two videos:

First stage was to glue the inner walls and roof together, the front elevation molding (see below) and the front steps together. I then spray painted all the components black (I used Fiddly Bits - it's cheap and works for me). Here you can see the front elevation molding:

I then brushed a raw umber craft paint (Kaiser colour) over the brick sections, followed by a bright red dry brush (an old tub of Citadel Blood Red):

This was then followed by a rough dry brush of Vallejo Stone Grey (70.884). I was experimenting on the section that I knew would be covered by the other components, mainly trying to get a range of colours and textures:

The next part was messy. Using simple chalk ($2 from the Reject Shop) I followed Viv's method:

After wiping it down, I repeat the steps two/three times in the section I missed. I skipped the dry brush stage and just sprayed matt varnish over all the surfaces once to lock the chalk in:

Things are starting to take shape, I painted the concrete sections with two/three thin coats of cool grey craft paint (Kaiser colour):

Next step will be a highlight dry brush on the concrete sections and then start to glue it all together with PVA before washes, dry brushing and tufts, etc to make it more cohesive.